RETAINING COMPOUNDS

SEALXPERT RC603 RETAINING COMPOUNDS

FEATURES:

  • High strength, low viscosity
  • Good oil tolerance, can be used on surfaces with slight oil contamination

APPLICATION:

  • Seals and secures cylindrical assemblies under 0.005” (0.13 mm ) diametrical clearance
  • Designed for transition and interference fit
  • Used for slightly oily surface and inert surface

SEALXPERT RC603 RETAINING COMPOUNDS

Retaining Compound Green - high strength, high oil tolerance, ideal for bearings, for use on close-fitting cylindrical parts

PACKAGE:

  • 50 ml / bottle

SEALXPERT RC620 RETAINING COMPOUNDS

FEATURES:

  • Thixotropic viscosity
  • Self-curing high temperature resistant

APPLICATION:

  • Designed to retain cylindrical fittings which can endure high temperatures 232 °C (450 °F)
  • Generally applicable for parts whose working temperature is 150 °C (302 °F) to 230°C (446 °F) (intermittent and continuous)
  • Used to bond and retain automobile air valve sleeve, injection molding machine core sleeve, valve bushing, cylinder liner, plunger pin in steam hammer; seal or lock thread

SEALXPERT RC620 RETAINING COMPOUNDS

Retaining Compound Green - high strength, high temperature resistance, high viscosity liquid retaining compound for cylindrical bonding

PACKAGE:

  • 50 ml / bottle

SEALXPERT RC638 RETAINING COMPOUNDS

FEATURES:

  • Maximum high strength, high viscosity
  • Fixture in 5 minutes

APPLICATION:

  • Used for retaining cylindrical assembly where fit clearance can approach 0.01” (0.26 mm) and where maximum strength at room temperature is required
  • Lock bushings and sleeves into housings and on shafts
  • Designed for transition and interference fit

SEALXPERT RC638 RETAINING COMPOUNDS

Designed for bonding cylindrical fittings of 0.25 mm gaps, high-temperature and good oil tolerance, tolerates minor surface contaminants

PACKAGE:

  • 50 ml / bottle

SEALXPERT RC648 RETAINING COMPOUNDS

FEATURES:

  • High strength, medium to low viscosity
  • Withstand high temperature to 175 °C (347 °F)
  • Fixture in 5 minutes

APPLICATION:

  • Used for dynamic loading or periodic loading working conditions
  • High temperature resistant, cures fast, retaining cylindrical assembly where fit clearance is less than 0.006” (0.15 mm)
  • Designed for transition and interference fit

SEALXPERT RC648 RETAINING COMPOUNDS

Retaining Compound - high strength. High temperature resistance. Ideal for retention of parts with a clearance or interference fit

PACKAGE:

  • 50 ml / bottle

SEALXPERT RC680 RETAINING COMPOUNDS

FEATURES:

  • High strength, medium viscosity
  • Enhances bonding strength

APPLICATION:

  • Used for diametral clearance of less than 0.01” (0.25 mm) clearance fit or transition fit with the best fit clearance between 0.002” (0.05 mm) to 0.004” (0.10 mm)
  • Replace press fit and prevent rust
  • Used for slight rotating (worn) bearing, shaft sleeve etc. fittings, retain belt pulley, bushing, gear wheel, rotor, rebuild hole-shaft fitting parts and out-of-tolerance parts
  • Designed for transition and interference fit.

TECHNICAL DATA

Product No.Typical UseMax
Gap
Fill
mm
UncuredCuredCuring Speed
ColourViscosity
mPa.s
Specific
Gravity
g/cm3
Shear
Strength
Psi (kg/cm2)
Temperature
Range
°C (°F)
Fixture
min
Full
Cure
Hour
RC603Slightly oil contaminated surface0.13Green2001.10> 2901
(> 204)
-50 to 150
(-58 to 302)
5 – 1024
RC620high temperatures 232 °C (450 °F)0.30Green8,5001.15> 2901
(> 204)
-50 to 230
(-58 to 446)
30 – 10024
RC638Maximum strength0.26Green2,5001.09> 4496
(> 316)
-50 to 150
(-58 to 302)
5 – 1024
RC648Withstands continuous
working high temperature up to 175 °C (347 °F)
0.15Green5001.15> 2611
(> 184)
-50 to 175
(-58 to 347)
5 – 1524
RC680For clearance and transition fit0.25Green1,2501.12> 2756
(> 194)
-50 to 150
(-58 to 302)
10 – 1524

SEALXPERT RC680 RETAINING COMPOUNDS

 

Retaining Compound is a high strength, high viscosity room temperature curing adhesive used to join fitted cylindrical parts; fixtures in 10 minutes

PACKAGE:

  • 50 ml / bottle