Maintenance

Home / Product / Sealxpert RC680 Retaining Compounds

Sealxpert RC680 Retaining Compounds

PACKAGE:

50 ml / bottle

SEALXPERT RC680 RETAINING COMPOUNDS

FEATURES:

High strength, medium viscosity
Enhances bonding strength

APPLICATION:

Used for diametral clearance of less than 0.01” (0.25 mm) clearance fit or transition fit with the best fit clearance between 0.002” (0.05 mm) to 0.004” (0.10 mm)
Replace press fit and prevent rust
Used for slight rotating (worn) bearing, shaft sleeve etc. fittings, retain belt pulley, bushing, gear wheel, rotor, rebuild hole-shaft fitting parts and out-of-tolerance parts
Designed for transition and interference fit.

TECHNICAL DATA:

Product No.	Typical Use	Max Gap Fill mm	Uncured			Cured		Curing Speed
Product No.	Typical Use	Max Gap Fill mm	Colour	Viscosity mPa.s	Specific Gravity g/cm3	Shear Strength Psi (kg/cm2)	Temperature Range °C (°F)	Fixture min	Full Cure Hour
RC603	Slightly oil contaminated surface	0.13	Green	200	1.10	> 2901 (> 204)	-50 to 150 (-58 to 302)	5 – 10	24
RC620	high temperatures 232 °C (450 °F)	0.30	Green	8,500	1.15	> 2901 (> 204)	-50 to 230 (-58 to 446)	30 – 100	24
RC638	Maximum strength	0.26	Green	2,500	1.09	> 4496 (> 316)	-50 to 150 (-58 to 302)	5 – 10	24
RC648	Withstands continuous working high temperature up to 175 °C (347 °F)	0.15	Green	500	1.15	> 2611 (> 184)	-50 to 175 (-58 to 347)	5 – 15	24
RC680	For clearance and transition fit	0.25	Green	1,250	1.12	> 2756 (> 194)	-50 to 150 (-58 to 302)	10 – 15	24