Corrosion Repair & Reinforcement

Home / Product / Wrap Seal Plus Surface Tissue

Wrap Seal Plus Surface Tissue

PACKAGE:

39″ x 820′ (1000 mm x 250 m)
Weight: 9.5 kg

WRAP SEAL PLUS SURFACE TISSUE

FEATURES:

Excellent fiber distribution
Good tear strength
Good tensile strength
Excellent weather-proofing

Longer service life
Non-hazardous
Impose seepage resistance

APPLICATION:

Applied with Wrap Seal PLUS Resin and Activator to provide high tensile strength, impact, abrasion,
and corrosion resistance for large surfaces (storage tanks, vessels, etc.)
Designed to be used as a surfacing tissue to provide a gel-coat/resin reinforcement and a smooth
resin-rich surface to the composite

TECHNICAL DATA:

Appearance and odour	:	White / Off-white colored solid with odour
Glass type	:	C
Fiber diameter	:	12.5μ ± 1
Binder type	:	Styrene-acrylic
Thickness	:	0.01″ (0.25 mm)

WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:

Corroded pipe surface

Roughen the area to be repaired

Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed

Apply two coats of activated resin evenly over the area to be repaired and allow to cure

Immerse Wrap Seal PLUS Fiberglass Repair Tape into water

Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length

Discard the plastic tube at the end of the roll

8.a. Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

FLAT SURFACE/TANK.
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped Strand Mat onto the affected area.