Corrosion Repair & Reinforcement

Home / Product / Wrap Seal Plus Chopped Strand Mat

Wrap Seal Plus Chopped Strand Mat

PACKAGE:

  • 39″ x 210′ (1000 mm x 64 m)
  • Weight: 30 kg
Download PDF

WRAP SEAL PLUS CHOPPED STRAND MAT

FEATURES:

  • Excellent conformability and handling
  • Excellent weight uniformity
  • Good mechanical properties
  • Good laminate smoothness
  • Non-hazardous

APPLICATION:

  • Applied with Wrap Seal PLUS Resin and Activator to provide high tensile strength, impact, abrasion and corrosion resistance for large surfaces with low curvatures (storage tanks, vessels, etc.)
  • Designed as surface rebuilding over large surfaces

TECHNICAL DATA:

Appearance and odour:White / Off-white colored solid with odour
Density:450 g/m2

WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:

  1. Corroded pipe surface
  1. Roughen the area to be repaired
  1. Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
  1. Apply two coats of activated resin evenly over the area to be repaired and allow to cure
  1. Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
  1. Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
  1. Discard the plastic tube at the end of the roll

8.a. Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

FLAT SURFACE/TANK.
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped Strand Mat onto the affected area.