Threadlocker, also known as thread-locking fluid, is applied to threads of fasteners such as screws and bolts to fill up to gaps and void spaces between metal components, and to mechanically bond the metal components together.
Threadlocker, also known as thread-locking fluid, is applied to threads of fasteners such as screws and bolts to fill up to gaps and void spaces between metal components, and to mechanically bond the metal components together.
|
Product No.
|
Typical Use
|
Max
Gap Fill mm |
Uncured | Cured | Curing Speed | |||||
| Colour | Viscosity mPa.s |
Specific Gravity g/cm3 |
Breakaway Torque Nm |
Prevail Torque Nm |
Temperature Range °C (°F) |
Fixture min |
Full Cure hour |
|||
| AT222 | M2 – M8, removable | 0.13 | Purple | 1,200 Thixotropic |
1.05 | 6 | 4 | -50 to 150 (-58 to 302) |
10 – 20 | 24 |
| AT242 | M8-M16, removable | 0.13 | Blue | 1,700 Thixotropic |
1.05 | 12 | 5 | -50 to 150 (-58 to 302) |
10 – 20 | 24 |
| AT243 | M8-M20, slight oil contamination |
0.13 | Blue | 2,250 Thixotropic |
1.05 | 20 | 7 | -50 to 150 (-58 to 302) |
10 – 20 | 24 |
| AT262 | M10-M26, permanent locking and sealing | 0.13 | Red | 1,800 Thixotropic |
1.10 | 22 | 30 | -50 to 150 (-58 to 302) |
10 – 20 | 24 |
| AT270 | M25, permanent locking and sealing |
0.13 | Green | 500 | 1.10 | 26 | 36 | -50 to 150 (-58 to 302) |
10 – 20 | 24 |
| AT271 | M16-M26, permanent locking and sealing | 0.13 | Red | 500 | 1.12 | 27 | 30 | -50 to 150 (-58 to 302) |
10 – 20 | 24 |
| AT272 | M25-M80, permanent locking and sealing | 0.25 | Red-orange | 4,000 – 15,000 Thixotropic | 1.11 | 23 | 25 | -55 to 200 (-67 to 392) |
40 | 24 |
| AT277 | M24-M36, permanent locking and sealing | 0.25 | Red | 7,000 | 1.12 | 30 | 30 | -50 to 150 (-58 to 302) |
23 – 30 | 24 |
| AT290 | Under M12, wicking grade |
0.10 | Green | 12 | 1.08 | 10 | 26 | -50 to 150 (-58 to 302) |
5 – 15 | 24 |