AEROSOL PRODUCTS
FEATURES:
- Electronic and electrical cleaner
- Grease and Oil removing agent
APPLICATION:
- Electronic and electrical components
- Hospital and health care equipment
- Household appliances / marine equipment
- Mould cleaner
CLEANER AND DEGREASER
WHAT IS A CLEANER AND DEGREASER
Cleaner and degreaser is a chemical product designed to remove grease, oils, cutting fluids, and other heavy contamination. It quickly breaks through tough grease and dirt.
The most commonly used cleaner and degreaser is water-based and solvent-based. Water-based cleaner and degreaser will create a ‘lift’ in the grease, causing it to float on the water and produce residues, which can then be removed by a variety of separation techniques. Solvent-based cleaner and degreaser designed to cause chemical reactions to change the state of the substance and make it easier to remove.
FEATURES:
- Heavy duty evaporating cleaner and degreaser.
- Specially formulated for diverse surface cleaning.
- Remove pitch ta, adhesives, heavy oil stains.
- Form a glossy clear layer to protect surface.
- Applicable for various machine parts
APPLICATION:
- Cleans low-voltage electric motors
- Cleans heavy duty equipment while in operation
WHY CHOSE OUR CLEANER AND DEGREASER
SealXpert® SP20 Cleaner and Degreaser is heavy-duty evaporating cleaner and degreaser for use on electric motors and other heavy-duty electrical and mechanical equipment. It minimises downtime by cleaning low voltage motors and equipment while in operation.
SealXpert® SP20 Cleaner and Degreaser is non-conductive, non-corrosive, and quickly penetrates into hard-to-reach areas.
SealXpert® SP20 Cleaner and Degreaser has a wide range of applications, such as industrial equipment and machinery, mechanical and electrical parts, auto parts and engines, cables and wires, electric motors and etc.
ZINC COLD-GALVANISING SPRAY (BRIGHT)
WHAT IS A ZINC SPRAY
Zinc spray is a sprayable, fast-curing zinc powder anticorrosive primer in an aerosol. It forms a fast-drying, adherent protective layer to repair damaged galvanic surfaces and to protect the entire exhaust system. The application of zinc spray can be carried out in the galvanizer’s plant or on the job site.
Zinc spray used as an anti-rust and anti-corrosion protection for iron and steel surfaces, especially at welding seams. It can be used as a coating for welding joints and drilling holes, as a conductive intermediate layer for spot welding and wherever metal must be protected from corrosion. Zinc spray is used in steel structure engineering, equipment, machinery, ships and appliances manufacturing. \
FEATURES:
- High zinc content
- High adhesion strength on surfaces
- Protective zinc surface coating
APPLICATION:
- Repair damaged galvanising surfaces
- Alternative to hot-dip galvanising
- Can be applied over bare steel surfaces and weld
- Used as finished coat
WHY CHOSE OUR ZINC SPRAY
SealXpert® SP30 Zinc Cold-Galvanising (Bright) is a zinc rich compound (95% enriched zinc content) that ideal for repairing damaged galvanised surfaces. It can be applied as an alternative if hot-dip galvanising is not available. SealXpert zinc spray can act as a finish coat on clean iron, steel and their welds.
SealXpert zinc spray has excellent adhesion properties and is easy to apply. Besides, it provides long-term corrosion protection, helps to prevent rust and corrosion of metal surfaces.
SealXpert zinc spray has a wide range of applications, such as welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs, water tanks, boats and etc.
FEATURES:
- Stops squeaks
- Loosen rusty, frozen and sticky parts
- Protects against rust and metal corrosion
- Removes moisture
APPLICATION:
- General and multi-purpose lubricating spray for all machine static and rotating parts and components
FEATURES:
- Designed to be running-in lubricant
- Does not require burnishing
- Quickly evaporates and allow sprayed parts to be used within seconds
- Has a high service temperature
APPLICATION:
- Seizure prevention during machine assembly
- Seizure prevention and run-in protection for motor axles, splines and cams
- Power screw and packing seals
- Lubrication during metal working
- Pre-treatment of surfaces
FEATURES:
- Seals, lubricates, protects, insulates and waterproofs
- Safe on most rubber and plastics
- Chemical, oil and water resistant
- Temperature resistant
APPLICATION:
- O-Rings lubrication
- Spark plugs lubrication
- Battery terminals lubrication
- Electrical contacts lubrication
- Gasket lubrication
- Plastics and rubber component lubrication
VARNISHCOTE CLEAR / VARNISHCOTE RED
FEATURES:
- Smooth brush-free finish on natural, stained or painted wood
- Dries in minutes
- Easy to use
APPLICATION:
- Protect printed circuit boards against creepage and short circuits
- Protecting components from condensation and moisture
- Insulates cables and wires
- Electrical contacts lubrication
- Coating terminal strips, screw connections, and switch boxes that are exposed to atmospheric effects
STAINLESS STEEL POLISH
FEATURES:
- Leaves a clean, smear free, polished surface
- Leaves no residue
APPLICATION:
- Removes streaks, smudges and fingerprint
- Prevents rust, corrosion and dis coloration
- Suitable for use on stainless steel, chrome, architectural aluminium, and other interior metal surfaces
- For elevators, escalators, dishwashers, refrigerators, windows, etc.
FEATURES:
- Easy to use
- Evaporates without leaving residues
APPLICATION:
- For functional testing of smoke detectors
- Works with both photoelectric and ionization smoke detectors
53 Ubi Avenue 1, #05-25 Paya Ubi Industrial Park, Singapore 408934
