修力宝二硫化钼Z粉

产品特点:

• 优良的润滑性
• 减少摩擦和磨损
• 抗氧化性
• 极限耐压
• 宽工作温度范围

应用:

• 用于暴露在极端环境下，低速和重载荷的应用
• 用于自润滑塑料，金属表面，金属加工化合物，制动衬片，压力配件以及作为助焊剂

技术数据:

修力宝二硫化钼微粉

产品特点:

• 优良的润滑性
• 减少摩擦和磨损
• 抗氧化性
• 极限耐压
• 宽工作温度范围

应用:

• 在许多困难和极端的环境中润滑各种金属表面
• 在极端负载和速度慢的金属/金属配对
• 在低负载和低到中等速度的金属/塑料配对

技术数据:

修力宝二硫化钼1000防卡剂

产品特点:

• 能用于宽温度范围
• 高负载能力
• 长时高温使用后的无损拆除
• 螺栓重复收紧和放松后，摩擦系数不变
• 良好的防蚀保护

应用:

• 适用于经受高达650°C（1202°F）的高温和腐蚀性影响的螺栓接头，组装和初始操作之后必须重新拧紧或断开。 为了确保恒定的预应力，需要润滑剂的均匀稳定的摩擦系数
• 成功地用于气缸盖螺栓，塑料注塑机的喷嘴头螺钉，化学工业中的螺栓接头以及离心机的张力环

技术数据:

修力宝SP50二硫化钼G-RAPID

产品特点:

• 设计为磨合润滑剂
• 无需抛光
• 快速蒸发，允许喷涂部件在几秒钟内使用
• 具有较高的工作温度

应用:

• 在机器装配过程中预防发作
• 电动机轴，花键和凸轮的防止和防护
• 电动螺丝和包装密封
• 金属加工时的润滑
• 预处理表面

修力宝铜质防卡剂

产品特点:

• 高效抗氧化剂
• 抗腐防震
• 抗热胀冷缩
• 确保螺纹零件的快速易装配
• 防卡
• 减少高摩擦区域的磨损
• 承受温度从 -40°C 到 1100°C (-35°F 到 2000°F)

应用:

• 即使在长时间暴露于高达1100°C（2000°F）的高温区域或在诸如煤矿或海洋环境等腐蚀性条件下，也能快速，无故障地拆除日常维护
• 广泛用于工具接头，钻铤，精密螺纹，大直径和小直径管道和阀门

技术数据:

修力宝镍质防卡剂

产品特点:

• 在非熔体基中含有镍，铝和石墨
• 含有腐蚀和氧化抑制剂
• 具有抗酸碱和氨
• 建议在不能使用铜时使用

应用:

• 用于螺纹部件，衬套，齿轮，阀门系统，链轮，杠杆，铰链，枢轴，滚子，热交换器或歧管螺栓
• 也用作垫片脱模剂
• 导电并保护高达1350°C
• 推荐用于不锈钢螺丝，法兰，喷嘴，联轴器和其他金属配件
• 也用于高镍合金材料如不锈钢或其中涉及钛或其他硬质金属的地方

SEALXPERT ALUMINIUM ANTI-SEIZE COMPOUND

FEATURES:

• Aluminium based anti-seize compound
• High Oxidation resistance
• Provides rust protection and reduces fretting corrosion
• Good resistance against both fresh water and seawater, suitable for marine use

APPLICATION:

• Provides long term protection under the toughest exposure and temperature conditions to prevent wear, corrosion, rust and seizure.
• Use on all studs, nuts, bolts and other threaded connections, including turbine casing studs, burner nozzles, all boiler inspection points and furnace bolts.
• Ideal for applications where the presence of copper is not desirable due to the risk of electrolytic corrosion, or in the presence of chemicals which react with copper

修力宝二硫化钼M77膏

产品特点:

• 膏状润滑高达 230°C (446°F), 固体润滑高达 400°C (662°F)
• 耐水性好
• 好的挥发性
• 兼容多种弹性体和塑料(测试兼容性)

应用:

• 适用于经受水和极端温度，低至中等载荷和低速度的润滑点
• 适用于不耐矿物油的材料组成的润滑部件
• 成功地用于具有摩擦和接触表面的金属/金属组合，制动锚板和盘式制动器的制动活塞

技术数据:

修力宝二硫化钼G-N膏

产品特点:

• 高压力吸收能
• 低摩擦系数
• 防止摩擦腐蚀
• 粘滑运动保护
• 良好的防蚀特性
• 降低摩擦腐蚀
• 简化拆卸程序
• 高表面覆盖能力

应用:

• 适用于所有类型的机器元件的生产，作为新机器和变速箱的润滑剂
• 很少或略微移动的机械元件的永久润滑，也可用于钻孔，锯切和螺纹切削
• 成功地用于润滑螺纹轴，花键轴，齿轮，蜗轮和传动齿轮，螺钉，阀门，泵，机床导轨，以及用于紧固和安装滚子轴承，垫圈，轮子，法兰和螺栓

技术数据:

修力宝二硫化钼M液体分散体

产品特点:

• 提高承载能力，减少摩擦，磨损和噪音
• 降低石油操作温度并停止齿轮点蚀
• 固体润滑剂颗粒小到足以通过所有常见的过滤器类型

应用:

• 推荐作为添加剂到矿物基润滑，在循环和飞溅润滑系统和齿轮箱中的发动机油和齿轮油

修力宝二硫化钼M-30液体分散体

产品特点:

• 提高承载能力，减少摩擦，磨损和噪音
• 降低石油操作温度并停止齿轮点蚀
• 固体润滑剂颗粒小到足以通过所有常见的过滤器类型

应用:

• 推荐作为添加剂到矿物基润滑，在循环和飞溅润滑系统和齿轮箱中的发动机油和齿轮油

SEALXPERT M-800

FEATURES:

• Air-dried molybdenum disulphide lubricant
• Does not gather dirt and grit

APPLICATION:

• Used to lubricate and prevent the seizing of machine parts during repair or reassembly despite repeated exposure to high temperatures

修力宝111硅酮润滑脂

产品特点:

• 无毒，硬的硅氧烷化合物
• 强粘附性和非熔化性能，并在宽温度范围内保持一致性
• 耐多种化学品和气体，并具有较低的蒸发率

应用:

• 长期润滑阀门，止动阀，塞子旋塞，’O’型圈，阀/唇形密封件，密封垫，垫圈，适用于某些真空和压力系统。

SEALXPERT 111 SILICONE GREASE LOW TEMPERATURE

FEATURES:

• Oxidisation resistance
• Non-corrosive
• Water washout resistance
• Good lubricity
• Chemically inactive

APPLICATION:

• Suited for low temperature lubrication, and provides resistance to oxidization and washout
• Lubricant for dynamic pneumatic o-rings
• As a seal between rubber and metal parts
• Lubrication for motors, pump, bearings, valves, gears, and seals

SEALXPERT 111 SILICONE COMPOUND

FEATURES:

• Excellent for high temperature bearings, conveyor systems, and low-temp refrigeration systems
• Water resistant
• Non-toxic
• Extremely chemical resistant
• Translucent paste
• Highly resistant to oxidation and shear breakdown
• Suitable for valve lubrication
• Low vapor pressure
• Low volatility
• High dielectric strength

APPLICATION:

• Lubrication for control and pressure plug valves, water softener and faucet valves
• Sealant for vacuum and pressure systems
• Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections
• Damping medium for dash pots in electrical and electronic equipment
• For subzero processing facilities and spiral freezer applications
• Rubber and plastic O-rings, gaskets and seals
• Chemical barrier coating

修力宝二硫化钼润滑脂

产品特点:

• 适合于广泛的应用，包括轴承，齿轮，和滑动部件
• 锂皂基润滑脂具有优良的耐水性和剪切稳定性
• 多用途润滑脂推荐一般和广泛的应用

应用:

• 推荐用于一般和广泛的应用的多用途润滑脂

修力宝高温二硫化钼润滑脂

产品特点:

• 含有耐热二硫化钼（MoS2）和石墨
• 即使在高温应用中也减少发作

应用:

• 适合于铁厂水泥厂等所需的极端高温
• 用于钢厂滑动喷嘴和旋转喷嘴中的滑动，旋转和螺纹部件
• 钢包吊架和炉风机轴承
• 轮胎衬里的转移面
• 水泥厂回转窑支撑辊; 在高温下的滑动部件，螺栓，螺母，销和衬套

修力宝高速二硫化钼润滑脂

产品特点:

• 低粘度酯油基，具有出色的低扭矩和低摩擦性能
• 卓越的润滑性在很宽的温度范围内持续较长的时间

应用:

• 用于电机轴承，旨在减少能源和电流的使用
• 用于高速运输线性运动装置和滚珠丝杠
• 用于高速旋转的机床主轴和其他轴承

修力宝开式齿轮和钢丝绳润滑脂

产品特点:

• 高耐压
• 高磨损保护
• 极粘合剂
• 耐水性

应用:

• 紧急润滑
• 用于与装配有油脂嘴中空销链的初始润滑
• 也用于在低速和高温下运行的齿轮传动和开式齿轮，滑动轴承

SEALXPERT PENETRATING OIL

FEATURES:

• Easy penetration
• Loosens rust, oil, grease
• Rust protection
• Displaces water / moisture
• Non-corrosive
• Non-conductive
• Lubrication
• Not harmful to paint or metals
• Low surface tension to replace moisture

APPLICATION:

• Used to loosen up rust and hardened oil and grease from nuts, bolts, shackles, etc. and for lubrication
• Intended for used wires to remove rust and old oil and grease before applying a new coating

SEALXPERT MACHINE CUTTING OIL

FEATURES:

• Inhibits corrosion and staining
• Improves surface finish
• Increases tool life
• Excellent cooling properties
• Extreme Pressure Resistant

APPLICATION:

• Suitable for all removal and grinding operations
• Extend tool life to keep metalworking and machining processes running smoothly

SEALXPERT MULTI-PURPOSE GREASE

FEATURES:

• Reliable high temperature performance
• Good oxidation and mechanical stability
• Excellent corrosion resistance
• Long storage life and low noise

APPLICATION:

• Used under a wide range of operating conditions, including severe duty, elevated temperatures and in the presence of moisture
• Rolling element and plain grease lubricated bearings
• Electric motor bearings

SEALXPERT EXTREME PRESSURE GREASE

FEATURES:

• Outstanding load carrying capacity
• Superior mechanical stability
• Excellent resistance to water wash-out
• Oxidation stability
• Excellent corrosion protection

APPLICATION:

• Heavy duty bearings served by centralised dispensing equipment
• Extreme-pressure gear grease for applications at normal ambient temperature
• Heavy duty bearings and general industrial lubrication
• Heavy duty plain and rolling element bearings operating under harsh conditions including shock loading in wet environments

SEALXPERT LOW TEMPRATURE GREASE

FEATURES:

• Water and steam resistant
• Provide excellent lubrication performances at low temperatures
• High oxidation stability
• Protects against corrosion

APPLICATION:

• Designed for low temperature freezer and cold storage applications
• Low temperature automotive applications
• For large low-speed rolling bearings subjected to high loads
• Ideal lubricant for spherical roller bearings in roller presses, bowl mill, rotary crushers and also suitable for plain bearings

SEALXPERT ELECTRICAL CONTACT GREASE

FEATURES:

• Increase reliability & longevity of connections
• Excellent conductivity
• Long-term protection against corrosion and wear

APPLICATION:

• Suitable for use with all materials used in the manufacture of electrical contacts and switch gear
• Ideal for applications in the automotive, rail, and electrical industries
• Particularly suited for the lubrication of copper alloy electrical contacts in an environment where plastic casings, housings or other plastic parts are present
• Conductive moving parts, switches, control valve pins, terminals, voltage regulators, etc.