DESGASTE & CORROSÃO REVESTIMENTO
SEALXPERT WR204 REVESTIMENTO RESISTENTE AO DESGASTE
CARACTERÍSTICAS:
- As microesferas de cerâmica e a liga de silício encheram o revestimento epoxy de dois componentes.
- Adequado para aplicação em superfícies verticais.
- Revestimento tem forte aderência e excelentes propriedades de desgaste e resistência ao impacto.
APLICAÇÃO:
- Projetado para reconstruir e pré-proteger a máquina desgastada por hidromassagem, erosão por corrosão e cavitação.
- Impulsores da bomba de água, concha, impulsor de vento induzido, etc.
DADOS TÉCNICOS:
| Cor | : | Cinza escuro |
| Força compressiva | : | 15954 psi (1122 kg/cm2) |
| Resistência à tração | : | 4351 psi (306 kg/cm2) |
| Força de cisalhamento | : | 2176 psi (153kg/cm2) |
| Dureza | : | 90 Costa D |
| Faixa de temperatura | : | -50 °C (-58 °F) to 121 °C (250 °F) |
| Mistura(A:B) | : | Peso– 4:1 / Volume – 4:1 |
| Vida em vaso | : | 40 minutos |
| Curar minuto antes da função | : | 50% carga- 10 hora 100% carga- 24 hora |
| Área de cobertura (por conjunto) | : | 378 cm2 at 6 mm espessura |
SEALXPERT WR206 WEAR SHIELD BRUSHABLE COATING (LARGE PARTICLES)
FEATURES:
- Alumina ceramic bead-filled epoxy system
- Outstanding abrasion resistance
- Designed for particulates larger than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes
- Recontour chippers, bins, hoppers, bunkers, separators, diester tables
- Protect exhausters, chutes, launderers, housing fans, crushers, and breakers
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,210 psi (296 kg/cm2) |
| Shear Strength | : | 1,474 psi (104 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR208 WEAR SHIELD BRUSHABLE COATING (SMALL PARTICLES)
FEATURES:
- Micro-alumina ceramic bead-filled epoxy
- Outstanding abrasion resistance
- Designed for particulates smaller than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyors
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,300 psi (303 kg/cm2) |
| Shear Strength | : | 1,375 psi (97 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR209 CORROSION BRUSHABLE COATING
FEATURES:
- Excellent chemical resistance to acids, solvents, and alkalis
- Temperature resistance to 160°C (320°F)
- Applies easily with short-bristle brush or roller
- Low viscosity, self-leveling liquid
APPLICATION:
- Seal and protect new equipment exposed to erosion and corrosion
- Protect pump casings, impeller blades, gate valves, water boxes, and fan blades
- Rebuild heat exchangers, tube sheets, and other water circulating equipment
- Top coat for providing exceptionally smooth surface to repaired surfaces
TECHNICAL DATA:
| Colour | : | Brown |
| Compressive Strength | : | 15,000 psi (1,069 kg/cm2) |
| Tensile Strength | : | 4,351 psi (306 kg/cm2) |
| Shear Strength | : | 1,450 psi (102 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 66°C (150°F) / Dry: 160 °C (320 °F) |
| Mixture (A:B) | : | Weight – 5.6:1 / Volume – 3.4:1 |
| Pot Life | : | 40 min |
| Coverage area (per set) | : | 7,200 cm2 at 0.375 mm thickness |
SEALXPERT WR210 CARBIDE PUTTY
FEATURES:
- Silicon carbide-filled epoxy putty
- Economical protection against wear and abrasion
- Designed for particulates smaller than 1.6mm (1/16”)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Particulate less than 1/16″: pipe elbows, pulverizers and slurry lines, cyclones and exhauster fans, chutes
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 8,160 psi (574 kg/cm2) |
| Tensile Strength | : | 2,640 psi (186 kg/cm2) |
| Shear Strength | : | 1,350 psi (95 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 49°C (120°F) / Dry: 121 °C (250 °F) |
| Mixture (A:B) | : | Weight – 8:1 / Volume – 4:1 |
| Pot Life | : | 50 min |
| Coverage area (per set) | : | 378 cm2 at 6 mm thickness |
SEALXPERT WR211 REVESTIMENTO RESISTENTE À CORROSÃO
CARACTERÍSTICAS:
- Composto de epóxi modificado, resistente ao desgaste de cerâmica e pó mineral de cristal.
- Viscosidade tixotrópica, adequada para aplicação na superfície vertical.
- Excelente resistência a alcalinos e ácidos fortes.
APLICAÇÃO:
- Usado para reconstruir e proteger materiais metálicos e instalações de concreto contra corrosão de.
- Solução ácida / alcalina
- Reconstrução e revestimento protetor de várias tubulações corroídas, bomba, válvula, permutador, etc.
DADOS TÉCNICOS:
| Cor | : | Cinza escuro |
| Força compressiva | : | 13053 psi (918 kg/cm2) |
| Resistência à tração | : | 4351 psi (306 kg/cm2) |
| Força de cisalhamento | : | 1450 psi (102 kg/cm2) |
| Dureza | : | 73 Costa D |
| Faixa de temperatura | : | -50 °C (-58 °F) to 121 °C (250 °F) |
| Mistura (A:B) | : | Peso– 5:1 / Volume – 4:1 |
| Vida em vaso | : | 60 minuto |
| Área de cobertura (por conjunto) | : | 378 cm2 at 6 mm espessura |
60 KAKI BUKIT PLACE, #09-11 EUNOS TECHPARK, SINGAPORE 415979
