SEALXPERT ANAEROBIC THREADLOCKERS

Low, medium or high strength thread locking removable or permanent adhesive designed for locking and sealing of screws, bolts, nuts, threaded fasteners to prevent loosening from vibration.

AT222 THREADLOCKER

  • Thixotropic viscosity, low strength
  • Easy removal, parts can be separated with hand tools

AT242 THREADLOCKER

  • Medium strength, thixotropic viscosity
  • Controlled lubricity for accurate clamp loads
  • Easy removal, parts can be separated with hand tools

AT243 THREADLOCKER

  • Medium strength, thixotropic
  • Good oil resistance, can be used on the surface with slight oil contamination
  • Controlled lubricity for accurate clamp loads
  • Easy removal, parts can be separated with hand tools

AT262 THREADLOCKER

  • Medium to high strength, thixotropic viscosity
  • Excellent chemical resistance
  • Good lubricity
  • Easy removal, parts can be separated with hand tools.

AT270 THREADLOCKER

  • Low viscosity, high strength
  • Excellent chemical resistance
  • Good lubricity
  • Heat and hand tools are required for disassembly.

AT271 THREADLOCKER

  • High strength, medium to low viscosity
  • Excellent chemical resistance
  • Good lubricity
  • Heat and hand tools are required for disassembly.

AT277 THREADLOCKER

  • High strength, high viscosity
  • Excellent chemical resistance
  • Good lubricity
  • Heat and hand tools are required for disassembly.

AT290 THREADLOCKER

  • Low viscosity, medium strength, high penetrability
  • wicking grade
  • Excellent chemical resistance
  • Seals 0.1mm gap welding seam, crack, dispersed shrinkage and casting microspores

SEALXPERT ANAEROBIC THREAD SEALANTS

Designed for low- and high-pressure threaded metal pipes and connection providing an instant seal that prevents leakage of gasses and liquids; replaces teflon tape

TS542 THREAD SEALANT

  • Thixotropic, low viscosity, medium strength
  • Contains no fillers and will not foul pipeline system

TS577 THREAD SEALANT

  • High viscosity, thixotropic, high strength
  • Contains no fillers and will not foul pipeline system
  • Suitable for large gap sealing and fast curing

TS545 THREAD SEALANT

  • Thixotropic, low viscosity, low strength
  • Good oil tolerance, can be used on surfaces with slight oil contamination
  • Contains no fillers and will no foul pipeline system

SEALXPERT ANAEROBIC FLANGE SEALANTS

Liquid gasket, gasket replacer, gasket eliminator – non-silicone flexible, gasketing material for use on rigid machined flanges

FS515 FLANGE SEALANT

  • Thixotropic viscosity
  • General purpose
  • Excellent solvent and chemical resistance

SEALXPERT RETAINING COMPOUNDS

Anaerobic adhesive that hardens in absence of air; secures bearings, bushes and cylindrical parts into housings or shafts forming a tight bond between assemblies

RC603 RETAINING COMPOUND

  • High strength, low viscosity
  • Good oil tolerance, can be used on surfaces with slight oil contamination

RC620 RETAINING COMPOUND

  • Thixotropic viscosity
  • Self-curing high temperature resistant

RC638 RETAINING COMPOUND

  • Maximum high strength, high viscosity
  • Fixture in 5 minutes

RC680 RETAINING COMPOUND

  • High strength, medium viscosity
  • Enhances bonding strength

RC648 RETAINING COMPOUND

  • High strength, medium to low viscosity
  • Withstand high temperature to 175 °C (347 °F)
  • Fixture in 5 minutes

SEALXPERT CYANOACRYLATE ADHESIVES

Single component general purpose, low viscosity instant adhesive super bonder. Rubber toughened, good humid resistance and high peel strength

CA401 CYANOACRYLATE ADHESIVE

  • General purpose
  • Medium viscosity
  • Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength

CA496 CYANOACRYLATE ADHESIVE

  • General purpose
  • Medium viscosity
  • Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength
  • Fast cure
  • Suitable for metal bonding

CA495 CYANOACRYLATE ADHESIVE

  • General purpose
  • Medium to low viscosity
  • Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength

MOLYBDENUM LUBRICANTS

molybdenum disulphide special solid film (dry) lubricants, moly greases, oils, anti-seize compounds, oil dispersions and additives, moly, aerosols. PTFE grease, electrical contact grease, silicone grease

SEALXPERT MOLY Z POWDER

  • Excellent lubricating properties
  • Reduction of friction and wear
  • Resistant to oxidation
  • Extreme pressure resistance
  • Wide service temperature range

SEALXPERT MOLY MICRO POWDER

  • Excellent lubricating properties
  • Reduction of friction and wear
  • Resistant to oxidation
  • Extreme pressure resistance
  • Wide service temperature range

SEALXPERT MOLY M1000 ANTI-SEIZE COMPOUND

  • Can be used over a wide range of temperature
  • High load-carrying capacity
  • Enables non-destructive dismantling, even after long use at high temperatures
  • Coefficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes
  • Good corrosion protection

SP50 MOLY G-RAPID

  • Designed to be running-in lubricant
  • Does not require burnishing
  • Quickly evaporates and allow sprayed parts to be used within seconds
  • Has a high service temperature

SEALXPERT COPPER ANTI-SEIZE COMPOUND

  • Highly effective oxidation inhibitors
  • Resistant to corrosion and vibration
  • Resistant to contraction and expansion
  • Ensures rapid and easy assembly of threaded parts
  • Prevents seizing and galling
  • Reduces wear in areas of high friction
  • Withstands temperature from -40°C to 1100°C

SEALXPERT NICKEL ANTI-SEIZE COMPOUND

  • Contains nickel, aluminium and graphite in a non-melt base
  • Contains corrosion and oxidation inhibitors
  • Resistant to acids and ammonia
  • Recommended for use when copper cannot be present

SEALXPERT MOLY M77 PASTE

  • Paste lubrication up to 230°C (446°F), dry lubrication up to 400°C (662°F)
  • Good water resistance
  • Good volatilization properties
  • Compatible with many types of elastomers and plastics (test for compatibility)

SEALXPERT MOLY GN PASTE

  • High pressure-absorption capacity
  • Low coefficient of friction
  • Prevents frictional corrosion and scoring
  • Protection from stick-slip
  • Good anti-corrosion properties
  • Reduces frictional corrosion
  • Simplifies dismantling processes
  • High surface covering capacity

SEALXPERT MOLY M LIQUID DISPERSION

  • Increases load-carrying capacity, reduces friction, wear and noise
  • Lowers oil operating temperatures and stops gear pitting
  • Solid lubricant particles are small enough to pass through all common filter types

SEALXPERT MOLY M-30 LIQUID DISPERSION

  • Increases load-carrying capacity, reduces friction, wear and noise
  • Lowers oil operating temperatures and stops gear pitting
  • Solid lubricant particles are small enough to pass through all common filter types

SEALXPERT 111 SILICONE GREASE

  • Non-toxic, stiff silicone compound
  • Strong adhesion and non-melting properties and maintains consistency over wide temperature range
  • Resistant to many chemicals and gases and has low evaporation rate

SEALXPERT MOLY GREASE

  • Suited to a wide range of applications, including bearings, gears, and sliding parts.
  • Lithium soap greases have excellent water resistance and shear stability.
  • Versatile greases recommended for general and wide applications.

SEALXPERT HI-TEMP MOLY GREASE

  • Containing heat-resistant molybdenum disulphide (MoS2) and graphite
  • Reduce seizure even at high temperatures applications

SEALXPERT HI-SPEED MOLY GREASE

  • Low viscosity ester oil base, which has outstanding low torque and low friction properties.
  • Exceptional lubricity lasts for long periods of time over a wide range of temperatures

SEALXPERT OPEN GEAR & WIRE ROPE GREASE

  • High pressure resistance
  • High wear protection
  • Extremely adhesive
  • Resistance against water

AEROSOL PRODUCTS

contact cleaners, cleaner & degreaser, cold galvanising zinc spray, multi purpose lubricant, anti-corrosive spray, moly dry film lubricant, silicone grease lubricant, varnish insulating aerosol

SP10 CONTACT CLEANER

  • Electronic and electrical cleaner
  • Grease and Oil removing agent

SP20 CLEANER & DEGREASER

  • Heavy duty evaporating cleaner and degreaser
  • Specially formulated for diverse surface cleaning
  • Remove pitch ta, adhesives, heavy oil stains
  • Form a glossy clear layer to protect surface
  • Applicable for various machine parts

SP30 ZINC COLD-GALVANISING (BRIGHT)

  • High zinc content
  • High adhesion strength on surfaces
  • Protective zinc surface coating

SP40 MULTIPURPOSE LUBRICANT

  • Stops squeaks
  • Loosen rusty, frozen and sticky parts
  • Protects against rust and metal corrosion
  • Removes moisture

SP50 MOLY G-RAPID

  • Designed to be running-in lubricant
  • Does not require burnishing
  • Quickly evaporates and allow sprayed parts to be used within seconds
  • Has a high service temperature

SP60 SILICONE GREASE

  • Seals, lubricates, protects, insulates and waterproofs
  • Safe on most rubber and plastics
  • Chemical, oil and water resistant
  • Temperature resistant