KEAUSAN DAN KOROSI PELAPIS
SSEALXPERT WR204 MEMAKAI LAPISAN TAHAN
FITUR:
- microsphere Keramik dan paduan silikon diisi coating epoxy dua komponen.
- Cocok untuk aplikasi pada permukaan vertikal.
- Coating memiliki adhesi yang kuat dan sifat yang sangat baik dari keausan dan ketahanan dampak.
APLIKASI:
- Dirancang untuk membangun kembali dan pra-melindungi mesin dikenakan oleh pusaran air, korosi dan erosi kavitasi, impeller pompa air, shell, diinduksi-draft fan impeller dll
DATA TEKNIS:
| Warna | : | Abu-abu gelap |
| Kekuatan tekan | : | 15954 psi (1122 kg/cm 2) |
| Kekuatan tarik | : | 4351 psi (306 kg/cm 2) |
| Kekuatan Geser | : | 2176 psi (153kg/cm 2) |
| Kekerasan | : | 90 Pantai D |
| Suhu Range | : | -50 °C (-58 °F) to 121 °C (250 °F) |
| Campuran (A: B) | : | Berat – 4:1 / Volume – 4:1 |
| Pot Hidup | : | 40 menit |
| Min. menyembuhkan waktu sebelum fungsi | : | 50% beban – 10 jam 100% beban – 24 jam |
| cakupan area (per set) | : | 378 cm 2 at 6 mm ketebalan |
SEALXPERT WR206 WEAR SHIELD BRUSHABLE COATING (LARGE PARTICLES)
FEATURES:
- Alumina ceramic bead-filled epoxy system
- Outstanding abrasion resistance
- Designed for particulates larger than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes
- Recontour chippers, bins, hoppers, bunkers, separators, diester tables
- Protect exhausters, chutes, launderers, housing fans, crushers, and breakers
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,210 psi (296 kg/cm2) |
| Shear Strength | : | 1,474 psi (104 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR208 WEAR SHIELD BRUSHABLE COATING (SMALL PARTICLES)
FEATURES:
- Micro-alumina ceramic bead-filled epoxy
- Outstanding abrasion resistance
- Designed for particulates smaller than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyors
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,300 psi (303 kg/cm2) |
| Shear Strength | : | 1,375 psi (97 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR209 CORROSION BRUSHABLE COATING
FEATURES:
- Excellent chemical resistance to acids, solvents, and alkalis
- Temperature resistance to 160°C (320°F)
- Applies easily with short-bristle brush or roller
- Low viscosity, self-leveling liquid
APPLICATION:
- Seal and protect new equipment exposed to erosion and corrosion
- Protect pump casings, impeller blades, gate valves, water boxes, and fan blades
- Rebuild heat exchangers, tube sheets, and other water circulating equipment
- Top coat for providing exceptionally smooth surface to repaired surfaces
TECHNICAL DATA:
| Colour | : | Brown |
| Compressive Strength | : | 15,000 psi (1,069 kg/cm2) |
| Tensile Strength | : | 4,351 psi (306 kg/cm2) |
| Shear Strength | : | 1,450 psi (102 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 66°C (150°F) / Dry: 160 °C (320 °F) |
| Mixture (A:B) | : | Weight – 5.6:1 / Volume – 3.4:1 |
| Pot Life | : | 40 min |
| Coverage area (per set) | : | 7,200 cm2 at 0.375 mm thickness |
SEALXPERT WR210 CARBIDE PUTTY
FEATURES:
- Silicon carbide-filled epoxy putty
- Economical protection against wear and abrasion
- Designed for particulates smaller than 1.6mm (1/16”)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Particulate less than 1/16″: pipe elbows, pulverizers and slurry lines, cyclones and exhauster fans, chutes
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 8,160 psi (574 kg/cm2) |
| Tensile Strength | : | 2,640 psi (186 kg/cm2) |
| Shear Strength | : | 1,350 psi (95 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 49°C (120°F) / Dry: 121 °C (250 °F) |
| Mixture (A:B) | : | Weight – 8:1 / Volume – 4:1 |
| Pot Life | : | 50 min |
| Coverage area (per set) | : | 378 cm2 at 6 mm thickness |
SEALXPERT WR211 KOROSI PADA RESISTEN LAPISAN
FITUR:
- Terdiri dari epoxy dimodifikasi, tahan aus bubuk keramik dan mineral kristal
- viskositas Thixotropic, cocok untuk aplikasi pada permukaan vertikal
- resistensi yang sangat baik untuk alkali kuat dan asam
APLIKASI:
- Digunakan untuk membangun kembali dan melindungi bahan metal dan fasilitas beton terhadap korosi asam / larutan alkali
- Membangun kembali dan lapisan pelindung dari berbagai pipa berkarat, pompa, valve, penukar, dll
DATA TEKNIS:
| Warna | : | Abu-abu gelap |
| Kekuatan tekan | : | 13053 psi (918 kg/cm2) |
| Kekuatan tarik | : | 4351 psi (306 kg/cm2) |
| Kekuatan Geser | : | 1450 psi (102 kg/cm2) |
| Kekerasan | : | 73 Pantai D |
| Suhu Range | : | -50 °C (-58 °F) to 121 °C (250 °F) |
| Campuran (A: B) | : | Berat– 5:1 / Volume – 4:1 |
| Pot Hidup | : | 60 menit |
| Cakupan area (per set) | : | 378 cm2 at 6 mm ketebalan |
60 KAKI BUKIT PLACE, #09-11 EUNOS TECHPARK, SINGAPORE 415979
