FIBER MAT

WRAP SEAL PLUS CHOPPED STRAND MAT

FEATURES:

  • Excellent conformability and handling
  • Excellent weight uniformity
  • Good mechanical properties
  • Good laminate smoothness
  • Non-hazardous

APPLICATION:

  • Applied with Wrap Seal PLUS Resin and Activator to provide high tensile strength, impact, abrasion and corrosion resistance for large surfaces with low curvatures (storage tanks, vessels, etc.)
  • Designed as surface rebuilding over large surfaces

TECHNICAL DATA:

Appearance and odour:White / Off-white colored solid with odour
Density:450 g/m2

WRAP SEAL PLUS CHOPPED STRAND MAT

1793 1793 Corrosion Protection1 - Fiber Mat

PACKAGE:

  • 39″ x 210′ (1000 mm x 64 m)
  • Weight: 30 kg

WRAP SEAL PLUS SURFACE TISSUE

FEATURES:

  • Excellent fiber distribution
  • Good tear strength
  • Good tensile strength
  • Excellent weather-proofing
  • Longer service life
  • Non-hazardous
  • Impose seepage resistance

APPLICATION:

  • Applied with Wrap Seal PLUS Resin and Activator to provide high tensile strength, impact, abrasion,
    and corrosion resistance for large surfaces (storage tanks, vessels, etc.)
  • Designed to be used as a surfacing tissue to provide a gel-coat/resin reinforcement and a smooth
    resin-rich surface to the composite

TECHNICAL DATA:

Appearance and odour:White / Off-white colored solid with odour
Glass type:C
Fiber diameter:12.5μ ± 1
Binder type:Styrene-acrylic
Thickness:0.01″ (0.25 mm)

WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:

1Procedure 1 - Fiber Mat
Corroded pipe surface
2procedure 002 - Fiber Mat
Roughen the area to be repaired
3Procedure 3 - Fiber Mat
Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
 

4procedure 004 - Fiber Mat
Apply two coats of activated resin evenly over the area to be repaired and allow to cure
5aProcedure 5 - Fiber Mat
Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
6aProcedure 6 - Fiber Mat
Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
 

7aProcedure 7 - Fiber Mat
Discard the plastic tube at the end of the roll
8aProcedure 81 - Fiber Mat
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
FLAT SURFACE/TANK
Procedure 9 - Fiber Mat
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area.

 

WRAP SEAL PLUS SURFACE TISSUE

1796 1796 Surface tissue - Fiber Mat

PACKAGE:

39″ x 820′ (1000 mm x 250 m)
Weight: 9.5 kg