LEAK REPAIR KIT

WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

FEATURES:

Repairs leak in 30 minutes
Applicable to pipes up to 18″ (457 mm) diameter
Applicable on any metal or non-metal pipes
Repairs T-joint, elbow joint, valve thread, valve body
Withstand pressure up to 400 psi (28 kg/cm2)
Withstand temperature up to 200 °C (392 °F)
Safe for drinking water and resistant to most chemicals
Reinforce and strengthen pipe after repair
Permanent repair and extend service life of pipes

APPLICABLE MATERIAL:

Steel
Copper
Aluminium
Galvanized steel
PVC
CPVC

Stainless steel
Polyethylene
Polypropylene
Cast-iron
Concrete
FRP/GRE

CHEMICAL RESISTANCE:

Oil
Water (drinking water, wastewater, steam)
Solvents (acetone, toluene, MEK, ethyl alcohol)
Mild acids (hydrochloric acid, sulfuric acid) and alkalis
Chemical (ethylene glycol, xylenes, ammonia)
Hydrocarbons
Bases
Slurries
Fuels (petroleum, diesels, gasoline)
Gases (LNG, LPG)
Organic salts

WORKING TIME (FIBERGLASS TAPE):

1 minute at 30 °C (86 °F)

CURING TIME:

  • 30 minutes at 30 °C (86 °F)
  • Heat may be applied to decrease curing time
  • Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.

APPLICATION:

  • Pipe repairs
  • offline repairs
  • sealing joints
  • hazardous material spill control
  • reinforce thinning walls
  • Abrasion protection
  • Structural reinforcement
  • Repairs in hard to reach areas
  • Underwater repairs

OPERATING TEMPERATURE:

  • Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
  • Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)

OPERATING PRESSURE:

  • Recommended for pressure up to 400 psi (28 kg/cm2)
  • (Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

appli 1 - LEAK REPAIR KIT (AR)Building & amp; Facilities
appli 2 - LEAK REPAIR KIT (AR)Electronics
appli 3 - LEAK REPAIR KIT (AR)Industrial Processing
appli 4 - LEAK REPAIR KIT (AR)Irrigation
appli 5 - LEAK REPAIR KIT (AR)Oil & amp; Gas
appli 6 - LEAK REPAIR KIT (AR)Chemical
appli 7 - LEAK REPAIR KIT (AR)Manufacturing Plants
appli 8 - LEAK REPAIR KIT (AR)Marine
appli 9 - LEAK REPAIR KIT (AR)Military
appli 10 - LEAK REPAIR KIT (AR)Offshore
appli 11 - LEAK REPAIR KIT (AR)Food Processing
appli 12 - LEAK REPAIR KIT (AR)Petrochemical
appli 13 - LEAK REPAIR KIT (AR)Pharmaceutical
appli 14 - LEAK REPAIR KIT (AR)Power Generation
appli 15 - LEAK REPAIR KIT (AR)Pulp & amp; Paper
appli 16 - LEAK REPAIR KIT (AR)Wastewater
appli 17 - LEAK REPAIR KIT (AR)Water Distribution
 
 
 

 

TECHNICAL DATA:

Pressure tested:1/2″ (15 mm) steel pipe with 1/8″ (3 mm) hole when repaired with Wrap Seal withstands 4000 psi (281 kg/cm2)
  1/2″ (15 mm) steel pipe with 1/2″ (13 mm) hole when repaired with Wrap Seal withstands 600 psi (42 kg/cm2)
Tensile strength:3920 psi (276 kg/cm2)
Bond strength:230 psi (16 kg/cm2)
Tensile elongation:1.2 % ± 0.7 %
Compressive strength:13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength:2260 psi (159 kg/cm2)
Cured hardness:82 Shore D
Pipe sizeNumber of rolls / size required
 50 psi (4 kg/cm2)
10 plys
150 psi (11 kg/cm2)
15 plys
400 psi (28 kg/cm2)
20 plys
½” (15mm)1 A1 A1 A
¾” (20mm)1 A1 A1 A
1″ (25mm)1 A1 A2 A
1¼” (32mm)1 A2 A3 A
1½” (40mm)2 A2 A1 B
2″ (50mm)1 B1 B1 B
2½” (65mm)1 B1 B2 C
3″ (80mm)1 B2 C2 C
4″ (100mm)1 B2 C3 C
Pipe sizeNumber of rolls / size required
 50 psi (4 kg/cm2)
10 plys
150 psi (11 kg/cm2)
15 plys
400 psi (28 kg/cm2)
20 plys
5″ (125mm)2 C2 C3 C
6″ (150mm)2 C2 C4 C
8″ (200mm)2 C3 C5 C
10″ (250mm)3 C4 C6 C
12″ (300mm)4 C5 C8 C
14″ (350mm)4 C6 C8 C
16″ (400mm)5 C7 C9 C
18″ (450mm)5 C8 C9 C
> 18″ (450mm)Contact SealXpert for recommendations
Roll sizeA
(2″ x 5′)
(50mm x 1.2m)
A
(2″ x 6′)
(50mm x 1.8m)
B
(2″ x 12′)
(50mm x 3.6m)
B
(3″ x 9′)
(75mm x 2.7m)
C
(4″ x 12′)
(100mm x 3.6m)

WRAP SEAL OFFLINE LEAK REPAIR PROCEDURE:

1Leak Repair Pro 1 - LEAK REPAIR KIT (AR)
Stop the pipe flow
2Leak Repair Pro 2 - LEAK REPAIR KIT (AR)
Roughen the area to be repaired
3Leak Repair Pro 3 - LEAK REPAIR KIT (AR)
Knead the Seal Stic
 

4Leak Repair Pro 4 - LEAK REPAIR KIT (AR)
Apply the Seal Stic to fill in holes or crack of the damaged or leak area.
5Leak Repair Pro 5 - LEAK REPAIR KIT (AR)
Immerse the Wrap Seal Fiberglass Tape into water
6Leak Repair Pro 6 - LEAK REPAIR KIT (AR)
Wrap the Wrap Seal Fiberglass Tape around the repair area as tightly and evenly as possible, using the entire roll
 

7Leak Repair Pro 7 - LEAK REPAIR KIT (AR)
Discard the plastic tube at the end of the roll
8Leak Repair Pro 8 - LEAK REPAIR KIT (AR)Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap
9Leak Repair Pro 9 - LEAK REPAIR KIT (AR)
Continue to polish the wrap until all bubbling has stopped.
Repair completed with smooth and hard ivory appearance
 

 

WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

1433 Pipe Repair Kit Wrap Seal Kit1 - LEAK REPAIR KIT (AR)

PACKAGE:

  • 1 roll of Wrap Seal Fiberglass Tape
    • 2″ x 5′ (50 mm x 1.2 m)
    • 2″ x 6′ (50 mm x 1.8 m)
    • 2″ x 12′ (50 mm x 3.6 m)
    • 3″ x 9′ (75 mm x 2.7 m)
    • 4″ x 12′ (100 mm x 3.6 m)
  • 1 unit of Seal Stic Quick Cure Epoxy
  • 1 pair of latex gloves
  • Operating instruction