MOLYBDENUM LUBRICANTS AND ANTI-SEIZE COMPOUNDS

SEALXPERT MOLY Z POWDER

FEATURES:

• Excellent lubricating properties
• Reduction of friction and wear
• Resistant to oxidation
• Extreme pressure resistance
• Wide service temperature range

APPLICATION:

• Used for applications that are exposed to extreme environments, slow speeds, and heavy loads
• Used on self-lubricating plastics, metallic surfaces, metal working compounds, brake linings, press fittings, and as a run-in aid

TECHNICAL DATA:

SEALXPERT MOLY MICRO POWDER

FEATURES:

• Excellent lubricating properties
• Reduction of friction and wear
• Resistant to oxidation
• Extreme pressure resistance
• Wide service temperature range

APPLICATION:

• Lubricate metal surfaces of all kinds in many difficult and extreme environments
• Metal/metal pairings at extreme loads and slow speeds
• Metal/plastic pairings at low loads and low to medium speeds

TECHNICAL DATA:

SEALXPERT MOLY M1000 ANTI-SEIZE COMPOUND

FEATURES:

• Can be used over a wide range of temperature
• High load-carrying capacity
• Enables non-destructive dismantling, even after long use at high temperatures
• Coefficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes
• Good corrosion protection

APPLICATION:

• Suitable for bolted joints that are subjected to high temperatures up to 650°C (1202°F) and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary
• Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry, and also for the tension rings of centrifuges

TECHNICAL DATA:

SP50 MOLY G-RAPID

FEATURES:

• Designed to be running-in lubricant
• Does not require burnishing
• Quickly evaporates and allow sprayed parts to be used within seconds
• Has a high service temperature

APPLICATION:

• Seizure prevention during machine assembly such as press or heat-fitting.
• Seizure prevention and run-in protection for motor axles, splines, and cams
• Protects against overheating of power screws and packing seals
• Lubrication during metal working such as thread cutting, grinding and casting
• Pre-treatment of surfaces before grease or oil lubrication
• Fretting corrosion prevention in the fitting area of machine parts

SEALXPERT COPPER ANTI-SEIZE COMPOUND

FEATURES:

• Highly effective oxidation inhibitors
• Resistant to corrosion and vibration
• Resistant to contraction and expansion
• Ensures rapid and easy assembly of threaded parts
• Prevents seizing and galling
• Reduces wear in areas of high friction
• Withstands temperature from -40°C to 1100°C (-35°F to 2000°F)

APPLICATION:

• Ensures quick and trouble-free dismantling for routine maintenance even after prolonged exposure to high temperature areas up to 1100°C (2000°F) or in corrosive conditions such as coal mining or marine environments
• Extensively used on tool joints, drill collars, precision threads, large and small diameter pipelines and valves

TECHNICAL DATA:

SEALXPERT NICKEL ANTI-SEIZE COMPOUND

FEATURES:

• Contains nickel, aluminium and graphite in a non-melt base
• Contains corrosion and oxidation inhibitors
• Resistant to acids and ammonia
• Recommended for use when copper cannot be present

APPLICATION:

• Use on threaded parts, bushings, gears, valve systems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts
• Also used as a gasket release agent
• Electrically conductive, protects up to 1350°C (2462°F)
• Recommended for use with stainless steel screws, flanges, nozzles, couplings and other metal fittings
• Also used where high Nickel alloy materials such as stainless steel, or where Titanium or other hard metals are involved.

SEALXPERT ALUMINIUM ANTI-SEIZE COMPOUND

FEATURES:

• Aluminium based anti-seize compound
• High Oxidation resistance
• Provides rust protection and reduces fretting corrosion
• Good resistance against both fresh water and seawater, suitable for marine use

APPLICATION:

• Provides long term protection under the toughest exposure and temperature conditions to prevent wear, corrosion, rust and seizure.
• Use on all studs, nuts, bolts and other threaded connections, including turbine casing studs, burner nozzles, all boiler inspection points and furnace bolts.
• Ideal for applications where the presence of copper is not desirable due to the risk of electrolytic corrosion, or in the presence of chemicals which react with copper

SEALXPERT MOLY M77 PASTE

FEATURES:

• Paste lubrication up to 230°C (446°F), dry lubrication up to 400°C (662°F)
• Good water resistance
• Good volatilization properties
• Compatible with many types of elastomers and plastics (test for compatibility)

APPLICATION:

• Suitable for lubrication points with low to moderate loads and low speeds which are subjected to water and extreme temperatures
• Suitable for lubricating parts consisting of materials that are not resistant to mineral oils
• Used successfully on metal/metal combinations with frictional and contact surfaces, brake anchor plates and the brake pistons of disc brakes

TECHNICAL DATA:

SEALXPERT MOLY GN PASTE

FEATURES:

• High pressure-absorption capacity
• Low coefficient of friction
• Prevents frictional corrosion and scoring
• Protection from stick-slip
• Good anti-corrosion properties
• Reduces frictional corrosion
• Simplifies dismantling processes
• High surface covering capacity

APPLICATION:

• Press-fit production of all types of machine elements, as a running-in lubricant for new machines and gearboxes
• Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting
• Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts

TECHNICAL DATA:

SEALXPERT MOLY M LIQUID DISPERSION

FEATURES:

• Increases load-carrying capacity, reduces friction, wear and noise.
• lowers oil operating temperatures and stops gear pitting.
• Solid lubricant particles are small enough to pass through all common filter types.

APPLICATION:

• Recommended as an additive to mineral-based lubricating, engine and gear oils in circulating and splash lubrication system and gearboxes.

SEALXPERT MOLY M-30 LIQUID DISPERSION

FEATURES:

• Increases load-carrying capacity, reduces friction, wear and noise.
• Lowers oil operating temperatures and stops gear pitting.
• Solid lubricant particles are small enough to pass through all common filter types.

APPLICATION:

• Recommended as an additive to mineral-based lubricating, engine and gear oils in circulating and splash lubrication system and gearboxes.

SEALXPERT M-800

FEATURES:

• Air-dried molybdenum disulphide lubricant
• Does not gather dirt and grit

APPLICATION:

• Used to lubricate and prevent the seizing of machine parts during repair or reassembly despite repeated exposure to high temperatures

SEALXPERT 111 SILICONE GREASE

FEATURES:

• Non-toxic, stiff silicone compound.
• Strong adhesion, non-melting and maintains consistency over wide temperature range.
• Resistant to many chemicals and gases.
• Low evaporation rate.

APPLICATION:

• Long-term lubrication of valves, stop cocks, plug cocks, ‘O’ rings, valve/lip seals, packings, gaskets.
• Suitable for some vacuum and pressure systems.

SEALXPERT 111 SILICONE GREASE LOW TEMPERATURE

FEATURES:

• Oxidisation resistance
• Non-corrosive
• Water washout resistance
• Good lubricity
• Chemically inactive

APPLICATION:

• Suited for low temperature lubrication, and provides resistance to oxidization and washout
• Lubricant for dynamic pneumatic o-rings
• As a seal between rubber and metal parts
• Lubrication for motors, pump, bearings, valves, gears, and seals

SEALXPERT 111 SILICONE COMPOUND

FEATURES:

• Excellent for high temperature bearings, conveyor systems, and low-temp refrigeration systems
• Water resistant
• Non-toxic
• Extremely chemical resistant
• Translucent paste
• Highly resistant to oxidation and shear breakdown
• Suitable for valve lubrication
• Low vapor pressure
• Low volatility
• High dielectric strength

APPLICATION:

• Lubrication for control and pressure plug valves, water softener and faucet valves
• Sealant for vacuum and pressure systems
• Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections
• Damping medium for dash pots in electrical and electronic equipment
• For subzero processing facilities and spiral freezer applications
• Rubber and plastic O-rings, gaskets and seals
• Chemical barrier coating

SEALXPERT MOLY GREASE

FEATURES:

• Lithium soap greases have excellent water resistance and shear stability
• Versatile greases recommended for general and wide applications.

APPLICATION:

• Suited to a wide range of applications, including bearings, gears, and sliding parts.

SEALXPERT HI-TEMP MOLY GREASE

FEATURES:

• Containing heat-resistant molybdenum disulphide (MoS2) and graphite, in various combinations.
• Reduce seizure even at high temperatures applications

APPLICATION:

• Suited to extreme high temperatures required at ironworks, cement plants, etc. for sliding; rotating and threaded parts in steel mill sliding nozzles and rotary nozzles, Bearings in ladle hangers and furnace dampers; transfer surfaces of tire liners and support rollers in rotary kilns at cement plants; sliding parts, bolts, nuts, pins, and bushings under high temp.

SEALXPERT HI-SPEED MOLY GREASE

FEATURES:

• Low viscosity ester oil base, which has outstanding low torque and low friction properties.
• Exceptional lubricity lasts for long periods of time over a wide range of temperatures

APPLICATION:

• Use on bearings in electric machinery designed to reduce energy and current usage
• Use on high speed conveyance linear motion devices and ball screws.
• Use on machine tool spindles and other bearings that revolve at high-speeds.

SEALXPERT OPEN GEAR & WIRE ROPE GREASE

FEATURES:

• High pressure resistance
• High wear protection
• Extremely adhesive
• Resistance against water

APPLICATION:

• Emergency lubrication
• Used for initial lubrication of chains with hollow pins equipped with grease nipples
• Also used for gear drives and open gears, sliding bearings operating at low speeds and high temperatures

SEALXPERT PENETRATING OIL

FEATURES:

• Easy penetration
• Loosens rust, oil, grease
• Rust protection
• Displaces water / moisture
• Non-corrosive
• Non-conductive
• Lubrication
• Not harmful to paint or metals
• Low surface tension to replace moisture

APPLICATION:

• Used to loosen up rust and hardened oil and grease from nuts, bolts, shackles, etc. and for lubrication
• Intended for used wires to remove rust and old oil and grease before applying a new coating

SEALXPERT MACHINE CUTTING OIL

FEATURES:

• Inhibits corrosion and staining
• Improves surface finish
• Increases tool life
• Excellent cooling properties
• Extreme Pressure Resistant

APPLICATION:

• Suitable for all removal and grinding operations
• Extend tool life to keep metalworking and machining processes running smoothly

SEALXPERT MULTI-PURPOSE GREASE

FEATURES:

• Reliable high temperature performance
• Good oxidation and mechanical stability
• Excellent corrosion resistance
• Long storage life and low noise

APPLICATION:

• Used under a wide range of operating conditions, including severe duty, elevated temperatures and in the presence of moisture
• Rolling element and plain grease lubricated bearings
• Electric motor bearings

SEALXPERT EXTREME PRESSURE GREASE

FEATURES:

• Outstanding load carrying capacity
• Superior mechanical stability
• Excellent resistance to water wash-out
• Oxidation stability
• Excellent corrosion protection

APPLICATION:

• Heavy duty bearings served by centralised dispensing equipment
• Extreme-pressure gear grease for applications at normal ambient temperature
• Heavy duty bearings and general industrial lubrication
• Heavy duty plain and rolling element bearings operating under harsh conditions including shock loading in wet environments

SEALXPERT LOW TEMPRATURE GREASE

FEATURES:

• Water and steam resistant
• Provide excellent lubrication performances at low temperatures
• High oxidation stability
• Protects against corrosion

APPLICATION:

• Designed for low temperature freezer and cold storage applications
• Low temperature automotive applications
• For large low-speed rolling bearings subjected to high loads
• Ideal lubricant for spherical roller bearings in roller presses, bowl mill, rotary crushers and also suitable for plain bearings

SEALXPERT ELECTRICAL CONTACT GREASE

FEATURES:

• Increase reliability & longevity of connections
• Excellent conductivity
• Long-term protection against corrosion and wear

APPLICATION:

• Suitable for use with all materials used in the manufacture of electrical contacts and switch gear
• Ideal for applications in the automotive, rail, and electrical industries
• Particularly suited for the lubrication of copper alloy electrical contacts in an environment where plastic casings, housings or other plastic parts are present
• Conductive moving parts, switches, control valve pins, terminals, voltage regulators, etc.