SealXpert^TM Wear Resistant Coatings

 

 

 

 

 

 

 

 

 

 

WR204 Brushable Wear Resistant Coating

à Thixotropic viscosity, brushable, non-sagging

à Filled with wear resistant ceramic

à Designed to rebuild and pre-protect the machine worn by whirlpool, corrosion and cavitation erosion, water pump impeller, shell and induced-draft fan impeller in power house, port, water conservancy and hydroelectric power, mine etc.

 

 

WR211 Brushable Corrosion Resistant Coating

à Thixotropic viscosity, brushable, non-sagging on vertical surface

à Excellent resistance to strong alkali and acid

à Designed to rebuild and protect corrosive pump, valve, tank and pipeline etc.

 

 

SealXpert^TM wear & corrosion resistant coating are ceramic filled epoxy system with outstanding abrasion and corrosion resistance to provide effective protection. These products can be applied onto slurry pumps, scrubbers, screens and screw conveyors.

Expert in Pipeline Products

Engineered Solutions for the Pipeline Industries

Home

Leak Repair Systems

Corrosion Repair Systems

Anaerobic Threadlockers

Retaining Compounds

Contact Us

Thread Sealants

Anaerobic Flange Sealants

Cyanoacrylate Adhesives

Quick Cure Epoxy Sticks

Metal Repair Putties

Wear Resistant Coatings

Epoxy Casting Systems

Blk 3007 #06-422, Ubi Road 1 Singapore 408701                                                                                                                                                                                                                             © 2004 SealXpert Products. All Rights Reserved.

Tel: +65 6747 1527               Fax: +65 6747 6547

Email: mailbox@sealxpert.com

PROPERTIES CHART

 

Product No.	Typical Use	Uncured (after mixed)		Cured
		Colour	Specific Gravity GB/T13354 -1992 g/cm3	Compressive strength GB/T1041 -1992 Mpa	Tensile strength GB/T6329 -1996 Mpa	Shear Strength GB/T7124 -1986 MPa	Hardness GB/T2411 -1980   Shore D	Temperature Range     °C
WR204	Cavitation erosion worn machine parts rebuilding and pre-protecting	White	1.65	86	28	18	93	-50 ~ 93
WR211	Corrosive machine parts rebuilding and pre-protecting	Green	1.5	90	33	18	84	-50 ~ 100

 

 

CURING CONDITIONS

 

Product No.	Typical Use	Mixture Ratio (A:B)		Pot Life* min	Minimum curing time before function  h
		Weight	Volume	100g mixture	50% load	100% load
WR204	Cavitation erosion worn machine parts rebuilding and pre-protecting	5:1	3:1	25	12	24
WR211	Corrosive machine parts rebuilding and pre-protecting	5:1	4:1	60	-	72

 

 

Note: * Temperature and mixture weight have great effect on pot life: below 15°C, curing speed is slow, it is recommended to heat: large mixture weight, pot life will be shortened.

          * Pot life means the time from mixing A, B component to dispensing the mixture to parts